Harbor Freight Tools 280CC Manuel télécharger pdf (Page 29)

Page 9For technical questions, please call 1-800-520-0882.280cc Engine

SAFETYOPERATIONMAINTENANCE SETUP

Manual Start

1. To start a cold engine, move the Choke to

the CHOKE position.

To restart a warm engine, leave the

Choke in the RUN position.

2. Open the Fuel Valve.

3. Slide the Throttle or Speed Control Lever to 1/3

away from the SLOW position (the “turtle”).

Note: Some tools have a Speed Control Lever located

elsewhere on the tool which functions the same as the

Throttle. Use the Speed Control Lever in place of the

Throttle when the tool is so equipped.

4. Turn the Engine Switch on.

5. Grip the Starter Handle of the Engine loosely and pull

it slowly several times to allow the gasoline to flow into

the Engine’s carburetor. Then pull the Starter Handle

gently until resistance is felt. Allow Cable to retract fully

and then pull it quickly. Repeat until the engine starts.

Note: Do not let the Starter Handle snap back

against the engine. Hold it as it recoils so it doesn't hit

the engine.

Choke RUN

OFF

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

Pas de commentaire

Harbor Freight Tools 280CC Manuel Page 29