Harbor Freight Tools OBD II & CAN Professional Scan Tool Manuel Page 3
- Page / 40
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Page 3For technical questions, please call 1-888-866-5797.Item 62120
Important Safety Information
Work Area Safety
1. Keep your work area clean and well lit.
Cluttered benches and dark
areas may cause accidents.
2. Do not connect or disconnect the
Scan Tool while the ignition is
on or the engine is running.
3. DO NOT attempt to operate
the Scan Tool while driving
the vehicle. Have a passenger
operate the Scan Tool.
4. Before testing a vehicle, engage the
parking brake and chock the tires.
5. NEVER smoke or allow a spark or
flame in vicinity of battery or engine.
6. Operate the vehicle in a well ventilated
work area.
Exhaust gases are poisonous.
7. Do not operate the Scan Tool
in explosive atmospheres, such
as in the presence of flammable
liquids, gases, or heavy dust.
8. Keep a fire extinguisher suitable for
gasoline/chemical/electrical fires nearby.
9. Use extreme caution when working
around the ignition coil, distributor
cap, ignition wires and spark plugs.
These components create hazardous
voltages when the engine is running.
10. Keep bystanders, children and visitors
away while operating the Scan Tool.
11. This product is not a toy. Do not allow
children to play with or near this item.
12. Use as intended only.
13. Inspect before every use; do not use
if parts are loose or damaged.
14. Do not place the Scan Tool
on any unstable surface.
15. Handle the Scan Tool with care. If
the Scan Tool is dropped, check for
breakage and any other conditions
that may affect its operation.
16. Keep the Scan Tool dry, clean,
free from oil, water or grease.
Use a mild detergent on a clean
cloth to clean the outside of the
Scan Tool, when necessary.
17. Store the Scan Tool and
accessories in a locked area
out of the reach of children.
18. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Electrical Safety
1. Do not use the Scan Tool
while standing in water.
2. Avoid body contact with grounded
surfaces such as pipes, radiators,
ranges and refrigerators.
3. Do not expose the Scan Tool to rain or
wet conditions.
Water entering the Scan Tool
increases the risk of electric shock.
4. Make sure your hands are dry
before operating the Scan Tool.
- Table of Contents 2
- Important Safety Information 3
- Work Area Safety 3
- Electrical Safety 3
- Personal Safety 4
- Specifications 5
- Overview 5
- OBD II On-Board Diagnostics 5
- Vehicle Coverage 5
- Definitions 6
- Control Modules 6
- I/M Monitors 7
- P 0 3 0 3 9
- Setup - Before Use: 10
- Functions 10
- Operating Instructions 12
- Connect Scan Tool 12
- Set Language 13
- Configure Monitors 14
- Unit of Measure 15
- Tool Self-test 16
- I/M Readiness Quick-Check 17
- Diagnostic Test Modes 18
- Access Diagnostic Menu 18
- Read Trouble Codes 19
- DTC Lookup 20
- Figure 5.9 21
- View Live PID Data 22
- [ ] – Select/Deselect 23
- Figure 5.21 24
- Playback Data 25
- Playback Live PID Data 27
- View Freeze Frame Data 28
- I/M Readiness 28
- 02 Monitor Test 29
- On-Board Monitor Test 30
- Component Test 31
- System, Test or Component 31
- Mode $09 Vehicle Information 32
- Modules Present 33
- Ready Test 34
- Print Data 35
- Install/Update Software 35
- Inspection and Maintenance 37
- Inspection 37
- Cleaning and Storage 37
- Troubleshooting 38
- Parts List 39
- Limited 90 Day Warranty 40
BLANCO Stellar Equal Double Bowl 441020 manuály
Uživatelské manuály a uživatelské příručky pro Kuchyňské dřezy BLANCO Stellar Equal Double Bowl 441020.
Poskytujeme 1 manuály pdf BLANCO Stellar Equal Double Bowl 441020 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Commentaires sur ces manuels