Harbor Freight Tools 2_1/2 HP 9 in. Benchtop Band Saw Manuel télécharger pdf (Page 7)

Page 7For technical questions, please call 1-800-444-3353.Item 60500

SAFETYOPERATIONMAINTENANCE SETUP

Assembly

1. Unpack the Table (8) and remove

the protective cover.

2. Slide the slot in the Table (8) around the Blade.

Position the Table (8) onto the

Saw over the two posts.

Then, pull out and release the Tilt Knob (19)

to help align the Table.

Tilt Knob

(

)

Tilt

Indicator

(

117

)

Indicator

Screw

(

119

)

Connect

Tilt Lock

(

)

here

Table

(

)

3. Secure the Table (8) using Tilt Lock (12) and

Flat Washer (13) through the hole shown above.

Leave the Tilt lock slightly loose for now.

4. Use a square (sold separately) to set Table (8)

perpendicular (90° angle) to Saw Blade (111) and

tighten the Tilt Lock (12) to secure the Table in place.

5. Loosen the Indicator Screw (119), turn the

Tilt Indicator (117) around to face the scale,

align the Tilt Indicator to 0° on the scale, and

hold it still while tightening the Indicator Screw.

6. Remove the Table Insert (9) from the Wing Bolt (11).

Insert the Insert into the end of

the slot on the Table (8).

Insert the Wing Bolt and Spring Washer (10)

up through the slot and into the

Table Insert (9) and tighten to secure.

Table

(

)

Table

Insert

(

)

Wing Bolt

(

)

Spring Washer

(

)

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Harbor Freight Tools 2_1/2 HP 9 in. Benchtop Band Saw Manuel Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Harbor Freight Tools 2_1/2 HP 9 in. Benchtop Band Saw